Push-Button Switch Supplier

Mini Push-button Switch is recommended for universal applications where a momentary operation is required. It comes in two types: push for momentary ON (normally open circuit) or push for momentary OFF (normally closed circuit). Rated up to 6 amps and 250 Vac within the T55 temperature limit, you can apply this switch with confidence and ease. For termination, choose either pre-wired, 6.8x1.0 mm Tab, or Circular Solder Tab.

Primary Product Number:
2720-PA (momentary ON when PUSHED)
2720-PB (momentary OFF when PUSHED)
2720-PA-FC (momentary ON when PUSHED, pre-wired)

MGSwitches offers several push-button switches with various styles. Both 2751-A and 2751-B are equipped with eye-catching bright red caps for easy identification. The 2752 series comes in either 2-pin or 4-pin version (for single pole or double pole application). This switch is often applied to automobiles or fridge doors that can turn on/off a response (e.g. lighting) when triggered. For safety measures, sensor switches can also be deployed to the bottom of appliances for tilt/topple detection.

The FP series Adhesive Pushbutton Switch Modules are useful for adding electronics to desired locations with the human-control interface still conveniently at hand. In automobiles, they are useful for adding customized light bars or fog lights with controls remained on dashboards. Each Switch Module is fitted with a strong double-sided adhesive foam pad which allows for easy and secure installation on clean and smooth surfaces. The switch itself is rated up to 300 mA 12 Vdc. In cases where one’s electronics demand higher electric power (a.k.a. wattage), use the switch to control an adequate relay which will provide the main power from a battery or other power sources.

Single Pushbutton (ON-OFF control for one (1) electronic; P/N: FP-002)
Double Pushbutton with the Main Power Switch (ON-OFF control for two (2) electronics; P/N: FP-001)